sticker – JOOPZY https://www.joopzy.com Always High Quality and Low Price Thu, 24 Jun 2021 20:00:14 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 https://www.joopzy.com/wp-content/uploads/2018/06/Layer-0-1-32x32.jpg sticker – JOOPZY https://www.joopzy.com 32 32 Car Compass Travel Wanderlust Direction Sticker https://www.joopzy.com/product/car-styling-compass-travel-wanderlust-direction-nswe-car-stickers/ https://www.joopzy.com/product/car-styling-compass-travel-wanderlust-direction-nswe-car-stickers/#respond Thu, 03 Jan 2019 07:36:26 +0000 https://www.joopzy.com/?post_type=product&p=98579 Car Compass Travel Wanderlust Direction Sticker Your sticker has 3 parts:
  • Paper Backing      
  • Sticker            
  • Clear Transfer Tape
1 Clean the surface where the decal will be installed.
2 Slowly remove the paper backing making sure that your decal remains stuck to the clear transfer tape. If part of your decal lifts up with the backing, press the paper backing back down against it until it stays stuck to the transfer tape.
3 Once your decal is peeled away from the backing, line up & position your decal against the surface to which it will be applied.
4 Use a credit card, square, or something similar to smooth down your decal, making sure that it is completely stuck to the surface.
5 Carefully & Slowly, remove the transfer tape from your decal, making sure that your decal is stuck to the surface. If you see part of the decal does not release from the transfer tape, press it back down to the surface and repeat the process.
]]>
  • Unit Type: piece
  • Package Weight: 0.01kg (0.02lb.)
  • Package Size: 25cm x 25cm x 1cm (9.84in x 9.84in x 0.39in)
    • ]]>     https://www.joopzy.com/product/car-styling-compass-travel-wanderlust-direction-nswe-car-stickers/feed/ 0     BABY ON BOARD Safety Car Sticker Sign https://www.joopzy.com/product/lovely-child-baby-on-board-safety-sign-car-stickers/ https://www.joopzy.com/product/lovely-child-baby-on-board-safety-sign-car-stickers/#comments Thu, 03 Jan 2019 07:34:57 +0000 https://www.joopzy.com/?post_type=product&p=98569 BABY ON BOARD Safety Car Sticker Sign Your sticker has 3 parts:
    • Paper Backing           
    • Sticker             
    • Clear Transfer Tape
    1 Clean the surface where the decal will be installed. 2 Slowly remove the paper backing making sure that your decal remains stuck to the clear transfer tape. If part of your decal lifts up with the backing, press the paper backing back down against it until it stays stuck to the transfer tape. 3 Once your decal is peeled away from the backing, line up & position your decal against the surface to which it will be applied. 4 Use a credit card, square, or something similar to smooth down your decal, making sure that it is completely stuck to the surface. 5 Carefully & Slowly, remove the transfer tape from your decal, making sure that your decal is stuck to the surface. If you see part of the decal does not release from the transfer tape, press it back down to the surface and repeat the process.]]>
  • Unit Type: piece
  • Package Weight: 0.01kg (0.02lb.)
  • Package Size: 25cm x 25cm x 1cm (9.84in x 9.84in x 0.39in)
    • ]]>     https://www.joopzy.com/product/lovely-child-baby-on-board-safety-sign-car-stickers/feed/ 10